Here are the most popular questions that we have received so far… don’t hesitate to send us yours, we will answer, for sure!

Where can i purchase the perimeter wire machine?

We invite you to visit our dealer locator to find the dealer in your area.
If your country is not listed, we invite you to contact us directly so we can provide you with the best solution. Thank you!

What is the engine used in the perimeter wire machine PWM600MH?

The Perimeter wire machine 600MH is provided with a 4-stroke Honda GXH-50cc motor.

Fill the gas (petrol) tank with UNLEADED PETROL. Do not use oil/gas (petrol) mixture. Fill the Honda engine with a maximum of 0.25 liters of SAE 10W-30 oil, API SJ. The engine has an angle of 10° to the frame. Consult the Honda engine user manual for more information.

How to install the blade?

The Perimeter wire machine PWM600HM is used with the reversible blade type 7 from Portable Winch Co. This means that the blade can be installed on both sides. The hole at the bottom of the blade is used to insert a tool that allows you to easily remove the blade.

You can also refer to the user manual for more details.

The heavy duty solid carbide blade for very stony and/or very compacted soils is also available (sold seperately).

What must i do before transporting the machine in my car?

The compact format and its light weight allow the Perimeter wire machine PWM600MH to be easily transported in a small car. Before doing so, we recommend that you shut the gas valve, also remove the wire guide, sliding foot and the blade to allow proper securement and positioning.

What type of yarn package can we use for this machine?

The Perimeter wire machine PWM600MH is designed to use most spools of threads provided by the manufacturers of robots such as cutting coils mounted on a drum; coils wound without drum or wound formless coils. Regardless of the drum type that you use, there is always a way to do it. Refer to the Products section or user manual for detailed information.

How to transport the machine to the work area?

It is easy to transport the machine from the work area to another. Here are the instructions;

  1. Loosen the clamping lever handle;
  2. Rotate the handle vertically to the machine;
  3. Lift the kickstand in front of the machine;
  4. Pull or push the machine towards the work area.

You can also refer to the user manual for more details.

When and how to use the edge distance guide of the machine?

The Perimeter wire machine 600MHMC is provided with an adjustable distance rod. It aligns the machine with the perimeter of the course and buries the wire at a distance ranging from 15 cm to 45 cm.

Using it is simple!

  1. Unscrew the wing nut;
  2. Position the distance rod at the desired distance, between 15 to 45 cm;
  3. Screw in the wing nut.

NOTE: The 0 cm measure can be found on the left of the distance rod block. This part of the block is aligned with the blade.

You can also refer to the user manual for more details.

What is the warranty?

Refer to the Warranty Policy section.